Outback Power Systems Sealed Inverter/Chargers FX2012ET

The OutBack FX series is a modular "building block” sine wave inverter/charger that can be used for both small and large power systems. Each OutBack FX inverter/charger is a complete power conversion system - DC to AC inverter, battery charger and AC transfer switch. Additional FX inverter/chargers can be connected at any time in either parallel (120 VAC), series (120/240 VAC), or three-phase (120Y208 VAC) configurations. This allows a system to be tailored to meet the specific power conversion requirements of the application, both at the time of the installation and in the future. The OutBack FX series is also available in export versions with 230 VAC, 50 hz output that can be connected in parallel (230 VAC) or in three phase (230Y400 VAC) configurations. Note: The FX2548 has the same basic features as the FX2024 with the exception of input voltage & power output.
The FX Series Inverter complete with FX-DCC (DC Connections Cover), FX-DCA (DC Conduit Adapter), and FX-ACA (AC Adapter).	The OutBack FX is designed to survive harsh environments anywhere in the world. Our unique sealed, gasketed die-cast aluminum chassis protects and keeps the power conversion components cool - without requiring outside air to be blown through the sensitive electronics. This reduces the major causes of inverter failure - corrosion, dust, insect and animal damage. The FX can be used in high ambient applications up to 60°C with reduced output ratings. A "Turbo" option is available with FX inverters. This consists of an external cooling fan and baffels to enhance operation in hot conditions. The new VFX Series with internal ventilation will function even better in hot conditions. The OutBack FX series inverter/charger system is designed for both residential and commercial stand-alone or back-up power applications with battery energy storage. It is designed to operate as a coordinated system with the other OutBack products i.e. the PSDC, PSAC and PSR enclosures as well as the MX60 MPPT charge controllers and MATE system controller and display. If the MATE is going to be controlling several devices at once a HUB-4 or HUB-10 will be required. The Remote Temperature Sensor, or RTS should be used to enhance battery charging.
	FXA a package of all three.

SPECIFICATIONS	FX2012T*	FX2012E**	FX2524T*	FX2024E**	FX2348E**	FX3048T*
Continuous Power @ 25°C	2000 VA (Turbo*)	2000 VA	2500 VA	2000 VA	2300 VA	3000 VA
Nominal DC Input Voltage	12 VDC	12 VDC	24 VDC	24 VDC	48 VDC	48 VDC
Nominal AC Voltage & Frequency	120 VAC 60 Hz	230 VAC / 50 Hz	120 VAC 60 Hz	230 VAC / 50 Hz	230 VAC / 50 Hz	120 VAC / 60 Hz
Continuous Output @ 25°C	17amps	8.7 amps	20.8 amps AC RMS	8.7 amps	10 amps AC RMS	25 amps AC RMS
Idle Power (with AC output / no load)	~20 Watts	18-20 Watts	~ 20 watts DC	18-20 Watts	21 to 23 watts DC	20 watts DC
Efficiency (typical at 25oC & 75% load)	90%	>90%	92%	92%	93%	93%
Total Harmonic Distortion (voltage)	2% / 5%	2% / 5%	2% typical / 5% maximum	2% / 5%	2% / 5%	2% typical / 5% maximum
Output Voltage Regulation	+/- 2% typical	+/- 2% typical	+/- 2% typical	+/- 2% typical	+/- 2% typical	+/- 2% typical
Surge Power Capability - AC output
Peak (1mSec)	56 amps AC	28 amps AC	70 amps AC	28 amps AC	35 amps AC	70 amps AC
RMS (100mSec)	40 amps AC	20 amps AC	50 amps AC	25 amps AC	25 amps AC	50 amps AC
Overload Capability (from 25oC start)
Surge	4800 VA	4600 VA	6000 VA	5750 VA	5750 VA	6000 VA
5 second	4000 VA	4000 VA	4800 VA	4800VA	4800 VA	4800 VA
30 minutes	2500 VA	2500 VA	3200 VA	3100 VA	3100 VA	3200 VA
Automatic AC Transfer Relay	60 amps AC	30 amps AC	60 amps AC @ 120 VAC	30 amps AC	30 amps AC	60 amps AC @ 120 VAC
AC Input Current	60 amps AC	30 amps AC max	60 amps AC max	30 amps AC max	30 amps AC max	60 amps AC max
AC Input Voltage Range (MATE Adjustable)	80-150VAC	200-260 VAC	80-150 VAC	200-260 VAC	200-260 VAC	80-150 VAC (adjustable)
Frequency Range - AC input	54-66 Hz	40-60 Hz	54-66 Hz	40-60 Hz	40-60 Hz	54-66 Hz
DC Input Voltage Range	10.5 – 17.5 VDC	10 – 16.5 VDC	21 - 34 VDC	20 - 33 VDC	40 - 66 VDC	42 - 68 VDC
Recommended DC Breaker	OBDC-250	OBDC-250	OBDC-175	OBDC-175	OBDC-100	OBDC-100
Continuous Battery Charger Output	80 amps DC	100 amps	55 amps DC	55 amps DC	35 amps DC	35 amps DC
Battery Charging Regulation Method	5 stage (bulk/absorb/float/silent/manual EQ)
Operating Temperature Range	-40°C to 60°C (derate 20VA/°C over 25°C)
Environmental Rating	Waterproof to IEC 529 IP 65
Inverter Dimensions	16.25” L x 8.25” W x 13”H
Shipping Box Dimensions	21.75” L x 13” W x 22” H
Shipping Weight	67 lbs - 30 kg	60lbs.-27.2kg	67 lbs.-30 kg	60lbs.-27.2kg	60lbs.-27.2kg	67lbs.- 30 kg
Warranty	Two years (optional extended 5 yr warranty)